3 Function Electric Medical Bed

A three function hospital bed is a type of electrically adjustable hospital bed designed for inpatient care. It controls the backrest, leg rest and overall bed height through an electric operating system. Compared with a fixed-height or two-function model, this 3 function electric hospital bed provides greater flexibility for patient positioning, bedside procedures and transfers.

The 450–700 mm height range allows caregivers to adjust the bed platform for different nursing activities. Dianya offers this model for hospitals, clinics, rehabilitation centers and long-term care facilities requiring a practical three function electric bed without the additional tilting functions of a five-function ICU model.

Three Function Hospital Bed Functions

• Backrest Adjustment

  The upper section can be raised from 0° to 75°. This allows patients to move from a flat position to a supported semi-seated position for meals, examinations, communication and routine care.

• Leg-Rest Adjustment

  The leg section can be elevated from 0° to 35°. Caregivers can change the lower-body position through the electric control instead of operating a manual crank.

• Overall Height Adjustment

  The entire bed platform can be raised or lowered between 450 and 700 mm. The lower setting supports patient access and transfers, while the raised position gives medical staff more suitable access during examinations, dressing changes and daily nursing procedures.

Three Function Hospital Bed Features

• Electric control of the backrest, leg rest and bed height

• Hi-Low adjustment range from 450 to 700 mm

• Two-section ABS side rails on each side

• Automatic rail locking when the rails are raised

• Safety release mechanism located beneath each rail

• Side rails retract below the bed platform when lowered

• Each rail supports more than 50 kg independently

• Smooth blow-molded headboard and footboard

• Surfaces designed for straightforward cleaning

• Ergonomic handles for moving and positioning the bed

• Transparent patient-information card slot on the footboard

• Footboard suitable for use as an emergency CPR board

• Adjustable non-slip hooks available in orange or blue

Three Function Hospital Bed Standard Configuration and Customization

• Electrically adjustable bed platform

• Backrest, leg-rest and height control system

• Integrated two-section ABS side rails

• Blow-molded headboard and footboard

• Patient-information card holder

• Ergonomic transport handles

• Adjustable non-slip hooks

• Emergency CPR board function integrated into the footboard

Comparison with Traditional Hospital Beds

Problems This Bed Addresses

• Unsuitable Working Height

  A fixed-height bed may be too low for bedside procedures or too high for convenient patient access. Electric Hi-Low adjustment allows caregivers to select a more suitable platform height for different tasks.

• Repeated Manual Repositioning

  Manual beds require staff to operate mechanical cranks whenever the patient’s position changes. The electric control system reduces manual operation during routine repositioning.

• Restricted Access During Transfers

  When lowered, the side rails retract beneath the bed deck. This creates more open access beside the mattress when transferring a patient to a wheelchair, stretcher or other care equipment.

• Difficult Cleaning and Patient Identification

  The smooth headboard and footboard surfaces simplify routine cleaning. A transparent information-card slot provides a designated place for patient identification.

• Unintended Side-Rail Release

  The release mechanism is positioned beneath the side rail, where it is less likely to be operated accidentally by the patient.